Pillowcase Party Dress – Projects For Beginners

This is the pillowcase party dress, a perfect project for those learning how to sew, yet still elegant enough to show off your new skills in a very flattering way.

The other day I read a comment on the SSE chat group, I had asked what you’d all like to see more of on the site. Someone wrote back saying that, they would like to see more simple projects, not those that are just for showing off sewing skills.

This got me thinking… have I lost touch with some of the readers? Am I sharing too many scary patterns with advanced sewing skills? Am I a show-off? If you knew me personally you would know that I am very humble when it comes to showing off (anything), in fact, there are but a handful of times when I take a picture of myself wearing the item I am sharing. I do hate having my picture taken and listening to my own voice on YouTube. Don’t take this as a sign that I have low self-esteem, not all. However, it is true the projects have not been so easy as of late, and the name of the blog is so-sew-easy after all. There are other issues about blogging that I will get on later.

Pillowcase party dress

For now, I thought I’d challenge myself to share patterns that are easy to put together that make great outfits, where you end up having the attention in a group especially when you are asked “did you make that…..(skirt, blouse, dress, pants, bag)?” and you very casually reply, “I made it”. Only to leave people green with envy.

Pillowcase party dress

What do people sew when they don’t know how to sew? I don’t even know. I think perhaps I have forgotten what is like not knowing how to use a sewing machine or even how to cut fabric. So here I go trying to imagine how I can make a dress for a party with little effort. I know many new readers look for new, simple projects to work with, and this party dress is a great one to start on.

Pillowcase party dress

Technically this pillowcase party dress should be made from a pillowcase, mind the redundancy here, but really what fun would that be? And are we 6 years old? no, so we need to spice up our dress in the following way.

Description

The bow is a decorative detail that brings us back to the 70’s decades, makes it in a contrasting color for added glamor.

Lined so it looks more elegant and expensive.

Above the knee, even short for some but if you wear it with high knee boots it will be the perfect sexy yet sophisticated outfit. You can always make it longer, but I would not wear it much lower than below the knee.

Materials

  • satin back crepe, charmeuse, crepe, wool crepe, or any fluid fabric with good body.
  • thread to match

Tools

  • scissors
  • tape measure
  • sewing machine
  • overlocker
  • sea ​​ripper
  • sewing needle size 70 or 80

Fabric Suggestions From Amazon.com

The pictures below will take you my recommendations on this site, use them as a guide. Click the picture and read the descriptions of the fabric. This is the best way to learn what fabric to use depending on the project.

How To Download Your Pillowcase Party Dress Pattern?

We’re going to continue to use the new Payhip web store to distribute our patterns. As most readers know, Craftsy, now Bluprint, has changed a lot and they have stopped designers like us from publishing new patterns on their site, so we’ve had to move to another service.

Our patterns are still free, but now you have the option of making a small contribution if you like my work! We’d really appreciate it and it will help is keep going with new and fun designs like this. Even a dollar or two really goes a long way.

Thanks so much in advance for helping us out. You can use any credit card and you don’t need a Paypal account, although you can use one if you have one

Pattern Download

Download Pattern HERE

Pattern layout

pillowcase party dress

Sewing skill: Beginner

You MUST read the following article

Please add the seam allowance to the pattern, I will be using a 1/2″ seam allowance.

The only other article you need to read before you start this project is:

Fitting Your Pillowcase Party Dress

Check the chest measurement, and allow at least 3″ for ease.

Size Chart And Finished Measurements

S M L XL
Chest 34″ 38″ 42″ 44″
Hips 35″ 40″ 44″ 48″

How To Make Your Pillowcase Party Dress

Step One: Making The Pleats

There are two pleats one in the front and one in the back. Follow the direction of the arrow marked in the pattern, which is towards the center.

pillowcase party dress

Another easy way to make a pleat is to pin the two notches together.

pillowcase party dress

Flatten the pleat with your finger distributing the fabric in equal parts.

pillowcase party dress

This is how the front looks.

pillowcase party dress

Here is the back view. This pleat is known as a box pleat.

pillowcase party dress

Baste to keep the shape. Basting is better than pinning when you are starting to sew.

pillowcase party dress

Step Two: Sewing The Outer Fabric

Sew the sides at 1/2″ or your chosen seam allowance.

pillowcase party dress

Step Two: Sewing The Lining

Make the pleats as you did before front and back and baste.

Sew the sides of the lining as you did on the outer layer.

Overlock the seam allowances.

Overlock the hem.

Step Three: Making The Loops And The Sash/Bow

You will need to make 14 loops, the fastest way to do it is to cut a strip of fabric 45″ in length by 2″ wide. Sew lengthwise at 1/2″.

pillowcase party dress

Turn using a loop turner or a safety pin.

pillowcase party dress

Cut into 3″ strips fold them and pin evenly upside down around the back and front neckline

pillowcase party dress

The loop that will serve as the shoulder strap needs to be pin at an angle see drawing below.

pillowcase party dress

Make sure the loop is not caught on the sides.

Showing below against the lining so it is not so distracting.

pillowcase party dress

Baste the loops.

pillowcase party dress

Step Four: Shaping Your Pillowcase Party Dress.

Print sides together. Be extra careful here, make sure you have the right side of the lining facing the loops with the right side of the print.

Start by sewing the armhole, then progress to the shoulder carefully sew the loop at the point but make sure you do not catch the loop sides with the seam allowance. Continue sewing the front, the other armhole and the back ending where you began. Turn the lining inside the dress. Iron. Understitch the armholes then clip the seam allowance to 1/4′.

pillowcase party dress

Understitch the front and back of the dress catching the seam allowance and the lining together, this will allow the lining to hand inside the dress without showing. Reduce the seam allowance to 1/4″.

pillowcase party dress

Step Five: Making The Sash/Strap/Bow

Cut a long strip of fabric 6″ wide and at least 76″ long. Mine is 76″ but I think I could have the bow a bit longer. I would add and extra 6″ if I could, but I have run out of fabric.

Loop the sash in the center loop at the back.

pillowcase party dress

Then thread the sash to the right and the left until you reach the loop that will work as a strap and sew a couple of stitches to prevent the dress from bunching up.

pillowcase party dress
pillowcase party dress

Pass the sash to the front and either make another couple of stitches or a knot as I did to secure the shoulder strap.

pillowcase party dress
pillowcase party dress

Continue threading the strip of fabric until you reach the center front loop and crisscross it to make a bow.

pillowcase party dress
pillowcase party dress

Finally, all it is left is to turn the hem twice and stitch it. I forgot to add the 1″ hem allowance, so my pillowcase party dress is short. Thankfully I am only 5’1″ so it doesn’t matter, but for you do not forget to add a one-inch hem and a 1/2″ seam allowance.

Did you notice my loops with a red/pinkish stain? I made a sash with the remains of next week’s project. Unfortunately, I did not test the fabric before working on it and I am wondering how much the dress color will change after the first wash? This is a newbie mistake.

What do you think of this pillowcase party dress? Do you find it is a beginner’s project?

Conclusion

So today I tried to show you how to end up with a dress that requires little effort to make. When I say little effort I don’t mean DIY stuff such as “She made two stitches and came up with a wedding dress type clickbait video nonsense. I meant there is very little fitting to be done. Because in real professional sewing the fitting and the details are what show the level of expertise.

I like to think of myself as an advanced intermediate. This is because I know there is still so much I can learn from others and the expert level is something people say about you not a title you give yourself. The moment we become arrogant and think we know it all is the day we will begin to stop being curious, wondering and learning. I guess that is my definition of aging.

There is another way to make this pillowcase party dress, how would you approach the shoulder straps? Leave me your thoughts and questions in the comments sections below. Always looking forward to hearing from you!

Until next time, Happy sewing!


If You’d Like To Support Our Site

If you want to help us continue to bring you a wide selection of free sewing patterns and projects, please consider buying us a coffee. We’d really, really appreciate it.

Leave a Comment