Spring Table Topper Tutorial – WeAllSew

Inspired by simple Scandinavian folk art designs, bright-colored appliqué shapes create a bouquet of springtime flowers and leaves. The Spring Table Topper makes a perfect setting for Easter eggs, a flower vase, or a centerpiece for your Easter table. It’s a breeze to create these flowers using the free template, just print out the pattern and follow along with the how-to below!

Spring Table Topper Tutorial by Erika Mulvenna

Materials to Make a Spring Table Topper

  • Print the Spring Table Topper template here
  • Fabrics: use all 100% cotton solids
    • 1/2 yard white for background and backing
    • Fat quarter or 1/4 yard bright pink
    • Fat quarter or 1/4 yard bright yellow
    • Fat quarter or 1/4 yard bright blue (try cyan or turquoise with your other colors)
    • Fat quarter or 1/4 yard bright yellow-green
    • 1/2 yard medium green
  • 1/2 yard Pellon 805 Wonder-Under paper-backed fusible webbing
  • 1/2 yard Pellon 987F Fusible Fleece one-sided fusible fleece
  • Isacord 40wt machine embroidery thread in colors to match fabrics
  • Pencil
  • Scissors and thread snips
  • Iron and pressing surface
  • Cutting mat, rotary cutter, and ruler
  • Sewing machine (I use a BERNINA 570 QE)
  • Reverse Foot with Clear Sole #34D for use with Dual Feed
  • Patchwork Foot #97D for use with Dual Feed

Steps to Make a Spring Table Topper

Prepare your fabrics first.

Spring Table Topper Tutorial by Erika Mulvenna

This project uses iron on adhesives, and these fusibles work best with pre-washed fabrics. Wash fabrics without any additives (leave out fabric softeners), and if you’re worried about bleeding colors you can either wash colors separately, or use a Color Catcher in the wash. Also leave dryer sheets out of the dryer, they can leave a residue that will prohibit the fusible from adhering to fabrics. Press fabrics well with just a hot iron and steam (no starches).

Next, prepare the white background square by cutting to 15″ x 15″ square. Lightly press in some registration marks to help you line-up the appliqué shapes following these steps.

Spring Table Topper Tutorial by Erika Mulvenna

First, lay the square on the pressing surface and fold one corner up to meet the opposite corner. Very lightly press the folded edge – the goal is not to press hard to crease the fabric deeply, but to make a lightly pressed fold that you will be able to see when the fabric is laid flat.

Spring Table Topper Tutorial by Erika Mulvenna

Use a sewing gauge to fold over 1″ of the raw edges down, and lightly press.

Spring Table Topper Tutorial by Erika Mulvenna

Do the same on the other side. Then gently open up both folded edges before moving on to the next step.

Spring Table Topper Tutorial by Erika Mulvenna

Fold the left bottom corner over to meet the right bottom corner and gently press the fold.

Spring Table Topper Tutorial by Erika Mulvenna

And finally, fold the top corner down to meet the lower right corner, and gently press the fold.

Spring Table Topper Tutorial by Erika Mulvenna

On opening the fabric, you will see folded marks diagonally, horizontally, vertically, and 1″ all around the outside edges. Now you’re ready to start cutting appliqué shapes and laying out the flowers.

Prepare the appliqué shapes. Print the template from the link above at 100%, do not shrink or stretch to fit as this will distort the template. Trace the pieces as marked with a pencil to the backside of the Wonder-Under. Trace shapes of the same color grouped together, and label each section with the color. This makes it easier to apply to the fabrics.

Spring Table Topper Tutorial by Erika Mulvenna

Cut out the sections for each color, and follow the manufacturer’s instructions to fuse the Wonder Under to the solid-colored fabrics.

Spring Table Topper Tutorial by Erika Mulvenna

You may be tempted to cut all the pieces out now, but don’t do it! You may lose some of the tiny pieces before you need them, just cut what you need for each step.

Begin by cutting out the large pink petals for the center flower, the 4 medium green flower stems, and the 4 light green flower stems. Peel the paper backing from each of these pieces.

Spring Table Topper Tutorial by Erika Mulvenna

Align the pink petals in the center of the white square, lining up the petals as shown. Notice that one set of petals meets the vertical and horizontal pressed marks in the center of the petals. The diagonal pressed marks line-up in between flower petals.

Spring Table Topper Tutorial by Erika Mulvenna

The longer, medium green stems line-up with the diagonal pressed marks, and slide under the pink flower about 1/4″.

Spring Table Topper Tutorial by Erika Mulvenna

The shorter, light green stems line-up with the horizontal and vertical pressed marks, and slide under the pink flower petals about 1/4″.

Spring Table Topper Tutorial by Erika Mulvenna

When you have arranged the shapes and are happy with the layout, gently cover with a press cloth and steam iron to set the shapes in place. Your goal is to have the shapes tacked down so that they don’t move. Peel back the press cloth and check to see if the shapes are set before moving on.

Spring Table Topper Tutorial by Erika Mulvenna

Next, add the pink flowers to the diagonal stems so that the sides of the petals are 1/2″ away from the pressed marks around the outside edge. Add the blue circles to the light green stems so that the edge of the blue circle is 1/2″ away from the pressed marks around the outside edge.

Spring Table Topper Tutorial by Erika Mulvenna

Then add the blue open circle and small yellow circle to the center flower. Cover with the press cloth and tack in place.

Spring Table Topper Tutorial by Erika Mulvenna

To add the final pieces, you may want to work on one corner or section at a time. The small flowers have yellow petals in the center and light green leaves. The pink flowers get a medium green flower base and three sets of leaves on each stem, just as pictured. Continue laying out and pressing pieces until the top is tacked together.

Spring Table Topper Tutorial by Erika Mulvenna

To finish preparing the top, cut a piece of Fusible Fleece piece 14 3/4″ x 14 3/4″ square, and place fusible side up on the pressing surface. Center the fused flower fabric square over the fleece, and follow the directions to press and fuse, using a press cloth. This final step will permanently fuse all those little appliqué pieces at the same time. Let the whole thing sit and cool down on the pressing surface after fusing.

As a final step, use temporary spray adhesive or spray basting to adhere a 15″ x 15″ square of white fabric to the back side of the fusible fleece, this will finish off the back side of the table topper.

Spring Table Topper Tutorial by Erika Mulvenna

Get ready to add stitching to the appliqué shapes to help hold the shapes down, and add a bit of texture to the table topper. If you are an experienced free-motion stitcher, you may choose to add stitching with FMQ. I use straight stitches and sew lines, gentle curves, and pivot in corners to add stitching. Feel free to add your own designs or stitching to your table topper to make it your own.

I us Isacord 40 weight embroidery thread in matching colors for each fabric, a straight stitch needle plate, a quilting needle size 75/11, and Reverse Pattern Foot with Clear Sole #34D with Dual Feed. This foot used in conjunction with Dual Feed will help move the layers through the machine smoothly to prevent puckering, and the clear foot gives an excellent view of what you’re sewing. Use a small straight stitch between 1.5mm and 1.75mm to sew around the shapes.

Spring Table Topper Tutorial by Erika Mulvenna

I start with yellow thread, adding some straight lines in the very center, and on the petals of the yellow flowers. In order to keep the thread tails off the backside of the project while sewing, I pull threads to the front of the project as I sew. Watch the video below to get an idea of ​​the process, then read the steps below.

After the yellow shapes, I add three lines of stitching around the blue shape in the center flower, move on to the pink flower petals, stitch the light green stems and leaves, and end with the medium green stems and leaves.

The first step is to pull up the bobbin thread before you begin stitching.

Spring Table Topper Tutorial by Erika Mulvenna

While holding the needle thread in one hand, lower the needle through the fabric where you want to start stitching. Raise the needle and tug on the needle thread to pull up the bobbin thread. Pull both threads out of the way.

Spring Table Topper Tutorial by Erika Mulvenna

Then, lower the needle down in the same spot, and begin to sew as you hold the threads out to the side. Just keep these tails out of your way as you are sewing on the shapes.

Spring Table Topper Tutorial by Erika Mulvenna

When finished sewing around a shape, sew a few stitches back over the start point, raise the needle, and pull out enough thread to have a few inches in the tails. Cut the bobbin thread and needle thread with snips.

Spring Table Topper Tutorial by Erika Mulvenna

Tug on the needle thread to pull the bobbin thread up to the top side of the project. Now keep these threads out of the way as you move on to stitch other shapes.

Spring Table Topper Tutorial by Erika Mulvenna

When you’re ready, use a needle to pull the thread tails to the back-side of the project. I use the same method used in this project to bury the thread tails on the back.

Spring Table Topper Tutorial by Erika Mulvenna

I am stitching these shapes free-hand, sewing the curves gently, pivoting in the corners with the needle down (check it out in the video above), and not worrying about being too perfect. If you need a line to follow, use a fabric marking pen or pencil that will disappear after sewing (just make sure to test on some scraps first). Draw some gentle curves or straight line shapes to follow as you sew.

Spring Table Topper Tutorial by Erika Mulvenna

Once stitching is finished and you’ve either buried all the tails or snipped your threads, give the table topper a little steam iron with a press cloth before trimming.

Spring Table Topper Tutorial by Erika Mulvenna

Trim 1/4″ off each side and square the table topper using a large cutting mat, rotary cutter and ruler.

Spring Table Topper Tutorial by Erika Mulvenna

Prepare at least 74″ of double-fold binding with the medium green fabric. Cut 2″ strips on the bias, sew shorter strips together on a 45° angle, and press finished strip in half lengthwise.

https://weallsew.com/bind-quilt-using-double-fold-binding/

Attach binding with a 1/4″ seam. You can continue to use Reverse pattern foot #34D, but using a true patchwork foot will help you to sew that perfect 1/4″ seam. I use Patchwork Foot #97D with Dual Feed.

https://weallsew.com/bind-quilt-using-double-fold-binding/

Leave a tail of the binding about 5″ long as you begin to sew the binding to the middle of one side of the project. Miter corners as you sew. Finish tails by cutting a 2″ overlap, sewing the ends on a 45° angle, trim seam, and finish sewing the folded binding to the edge. Hand-sew binding to the back of the table topper to finish.

Spring Table Topper Tutorial by Erika Mulvenna

Press finished binding well all around the table topper.

Spring Table Topper Tutorial by Erika Mulvenna

And enjoy the bright spring flowers!

Spring Table Topper Tutorial by Erika MulvenAna

I hope you enjoy making the Spring Flower Table Topper, my family truly loves the bright and cheery blooms on our table.

Spring Table Topper Tutorial by Erika MulvenAna

Leave a Comment